The Crescent Nicholson round knurl-cut chainsaw file features an American pattern. For optimal results, position the file against the beveled cutting surface of the teeth at an angle of 20 degree - 45 degree relative to the saw and file from the inside to the outside of the cutter. Sharpen all left-hand cutters on one side of the chain, then proceed to the other side to file all right-hand cutters. The height difference between the cutting teeth and the depth gauge should be between 0.02 inches and 0.03 inches. Check the depth gauge height every two or three sharpening's. Ensure the chain tension is tightened to securely support the cutters during filing.

American-pattern file featuring a knurled cut
Adjust the chain tension to securely stabilize the cutters during the filing process
Position the file at an angle of 20 degree to 45 degree against the beveled cutting surface of the saw teeth for optimal sharpening precision
File from the interior to the exterior of the cutter
Optimize the sharpening process by honing all left-hand cutters on one side of the chain, then transition to the opposite side to precisely file all right-hand cutters
Verify the height of the depth gauge after every two or three sharpening sessions
The height difference between the cutting teeth and the depth gauge should be maintained between 0.02 inches and 0.03 inches
Adhere to the manufacturer's specifications to ensure safe usage

Report incorrect product description

Reviews

Q & A

Retail Stock

Compliance

Shipping Restrictions

It is the customer’s responsibility for understanding state laws regarding all purchases made. For a comprehensive list of all Shipping Restrictions, please refer to our Shipping Restrictions By State Page found Here.

All NFA Rules Apply

These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).