Due to the Preliminary Injunction issued in Virginia, certain Non-Dropship Firearm and Magazine orders to Virginia addresses will still be fulfilled. This may be subject to change.
Out of stock online
Daniel Defense DDM4 V7
Out of stock online
Daniel Defense DDM4 V7
| SKU | 51655225437 |
|---|---|
| Brand | Daniel Defense |
| MPN | SB-012 NM |
| UPC | 818773024686 |
CA WARNING (Prop 65) & Compliance Information
Please read before purchasing.
Please read before purchasing.
Product Details
Details
Brand: Daniel Defense
Model/Series: DDM4 V7
Caliber: 5.56 Nato
Capacity: 30
Action: Semi-Auto
Operating System: Direct Impingment
Barrel Length: 16"
Thread Pattern: 1/2-28
Twist Rate: 1:7
Barrel Description: CMV CHF, Chrome Lined, Phosphate
Length: 32-1/4" - 35-7/8"
Weight: 6.2 lbs
Features
The DDM4 V7 AR15 style firearm features M-LOK attachment technology with the Daniel Defense MFR 15.0 rail. Built around a Cold Hammer Forged, 16 inch barrel, the V7 has a DD improved Flash Suppressor to reduce flash signature. The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts. With the M-LOK attachment points that run along 7 positions and an uninterrupted 1913 Picatinny rail on top, the V7 has plenty of room for the sights, optics, and accessories the user may require. The independently ambi GRIP-N-RIP Charging Handle accommodates left- and right-handed shooters. This rifle also comes with the ergonomic Daniel Defense Buttstock and Pistol Grip.
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- HANDGUARD: Daniel Defense MFR 15.0, CNC Machined of 6061-T6 Aluminum, M-LOK Attachment, Type III Hard Coat Anodized
- CHARGING HANDLE: GRIP-N-RIP Charging Handle, Body CNC Machined of 7075-T6 Aluminum, Handles & Latch CNC Machined of 6061-T6 Aluminum, Heavy Duty Stainless Steel Roll Pins, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- Made in the USA!
Reviews
Q & A
Retail Stock
Compliance
Shipping Restrictions
It is the customer’s responsibility for understanding state laws regarding all purchases made. For a comprehensive list of all Shipping Restrictions, please refer to our Shipping Restrictions By State Page found Here.
All NFA Rules Apply
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.
California 10+ Round Magazine Buyers: PSA values your freedom and constitutional rights above all else. However, PSA will not accept new orders nor will ship any order until the Ninth Circuit Federal Court of Appeals mandate becomes finalized. Once this mandate is finalized, we will start accepting new orders and ship 10+ round magazines to California Customers.
