PSA 10.5" 5.56 NATO 1/7" Nitride Classic Shockwave Pistol Kit, Flat Dark Earth - 5165449746

More Views

PSA 10.5" 5.56 NATO 1/7" Nitride Classic Shockwave Pistol Kit, Flat Dark Earth - 5165449746

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165449746
UPC: 5165449746
MFR#: 5165449746
  • 10.5" Barrel Length
  • Carbine Gas System
  • Nitride Treated Barrel
  • 5.56 NATO Chamber
  • 1 in 7" Twist Rate
  • PSA Standard Handguards, FDE
  • F-Marked Front Sight Post
  • A2 Flash Hider 
  • Forged Upper Receiver
  • Carpenter 158 Phosphate BCG & Charging Handle
  • Classic Shockwave Pistol Lower Build Kit, FDE

Add To:

Barrel: Nitride treated chrome-moly barrel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. Barrel is is finished off with a classic FDE carbine-length handguard, F-Marked gas sight base, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Lower Build Kit:  PSA Flat Dark Earth Classic Shockwave Pistol lower build kit with KAK Industries Shockwave Blade, KAK industries Shockwave Buffer Tube, carbine latch plate, and classic fire control group.

SKU: 5165449746
SKU 5165449746
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165449746

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 28 questions Browse 28 questions and 44 answers
is It legal with the brace? Or would I need to get a stamp to put the brace on considering it’s a pistol length rifle, I live in the state of Pennsylvania
Meatball on Nov 25, 2018
BEST ANSWER: In PA this is not a pistol length rifle. It is a pistol and nothing more or less. It is not a short barrel rifle "sbr" No stamp required. The same laws that govern your glock 19 or smith and wesson 66 govern this pistol.
So this ítem just needs to be assembled and is ready to fire, or does it need more parts to fire?
Abel R on Nov 24, 2018
BEST ANSWER: Has everything but a stripped lower. The lower will have to be shipped to a FFL. The upper and parts kit will come to your front door.
What is the overall length of the completed pistol?
Anthony G on Dec 29, 2018
BEST ANSWER: It depends on what notch you set your shockwave blade on the buffer tube. Mine is about halfway and is 28"
Can I get this item in black?
Alan R on Nov 21, 2018
BEST ANSWER: Yes, they also come in black.
What stripped lower is recommended for this kit?
Ken M on Nov 23, 2018
BEST ANSWER: Any lower labeled as multi or milspec will work perfectly fine PSA has some for 39.99
Does this have to be shipped to an FFL?
Derek M on Dec 21, 2018
BEST ANSWER: No, because a lower is not included. Only the lower needs to be shipped to an FFL
Can you get this item in a 7.5" barrel?
Royce H on Jan 8, 2019
What else would I have to purchase to have a working pistol?
Scott F on Jan 26, 2019
BEST ANSWER: I recommend a back up sight and if you like red dots, get one to cowitness. This pistol is excellent once assembled in a lower receiver of you choosing and the combination of sights is endless. Enjoy!
Does this pistol kit include BCG and CH?
Mr. Grinch on Jan 29, 2019
BEST ANSWER: Yes bcg and ch included
Will this 5.56 NATO shoot .223 cartridges?
markdepot m on May 2, 2019
BEST ANSWER: Have not put 223 through it i like the hotter charge of 556. I don’t see a problem though just make sure your head space is correct before any round.
If I wanted to put a Magpul handguard on this what size would I need?
Spartan165+ on Jan 31, 2019
BEST ANSWER: It’s a carbine length has system so the any hadguard that is carbine length. Usually they are around 6-7 inches
Can the muzzle be removed and be replaced for suppressor use?
Jacob L on Feb 28, 2019
BEST ANSWER: The muzzle brake can be removed, but applying a suppresor is out of my league.
Does this kit come with the trigger guard bottom plate?
eric b on Jan 2, 2019
BEST ANSWER: Yes, standard mil spec trigger guard.
does it come with a magazine?
Diego F on Dec 12, 2018
BEST ANSWER: No magazine, Magpuls and 2nd Ammends work well with it when you do buy mags.
I already have an assembled lower for a full size AR15. Will the assembled upper fit into that? Or do I need to strip it and add all the extra parts that come in this kit?
Achern on Jan 10, 2019
BEST ANSWER: Be careful, if the lower was recorded as a rifle lower then pursuant to current law it would be an illegal SBR, so when you get your lower from your FFL, it should be listed as a pistol or as a lower receiver, also check your local state laws as well.
What thread pitch is the muzzle end of the barrel?
Patrick B on Dec 8, 2018
BEST ANSWER: 1/2 x 28
What size of that stock plastic handguard?
Hiram abiff on Feb 26, 2019
Can residence from California purchased through you guys and have it delivered. With no legal problem. Because am interested in purchase?
Albert on Feb 23, 2019
I want to change out the handguard with the Wilson combat T.RI.M. 7.3 in handguard. Will it fit?
Johnny on Feb 12, 2019
Does this have to be shipped to a FFL in Maryland ?
Denny on Feb 1, 2019
Would the buffer I received in my PSA 7.5'' ar pistol kit build work for this 10.5'', or are they a different weight?
Ian T on Jan 29, 2019
Does this come with BCG and charging handle?
Keagan B on Jan 28, 2019
can you use any stripped lower to finish build or do you need a special lower stating it is a pistol lower
in indiana, do you need any special paper work to have after completing the build?
scott h on Jan 26, 2019
What is the length of the hand gaurd?
Steve B on Jan 26, 2019
Does anyone know what the buffer weight is ? Thanks
frank w on Jan 10, 2019
What kind of Buffer Tube is on this upper kit? Is it 7075 or 6061? Is it a 6 position or 5 position?
Scott M on Jan 6, 2019
BEST ANSWER: I don’t know about the metal type but I can tell you it is a commercial spec tube(slightly larger than mil-spec). I just tried to use my Magpul AR-15 armorer wrench to tighten the castle nut and no-can-do! :/ Kind of a pain, I wish it was mil-spec diameter tube.
Which bolt carrier comes with the kit ar 15 or the M16 ?
Georgia Patriot on Dec 30, 2018

Reviews

4.9 / 5.0
61 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
54
6
1
0
0
I love this gun! So much fun
User submitted image
Added May 21, 2019
May 21, 2019
Purchased
2 months ago
This is simply a hoot to shoot.
I thought the idea of an AR pistol was rather odd or silly...until I held this in my hands. It just begs to be shot. The Palmetto build is solid. I put an Anderson lower on it which works flawlessly, and changed the grip and trigger guard for Magpul, which I prefer. With the SigSaur Romeo 5 red dot, I was hitting a hand sized rock at 340 yards using both XM 193 and IMI 77 gr HPBT match. The thinness of the blade against your shoulder isn't a problem.
I added a SigSaur Romeo 5 red dot, and some Magpul bits, as well as an S2Delta sling.
I added a SigSaur Romeo 5 red dot, and some Magpul bits, as well as an S2Delta sling.
May 18, 2019
Purchased
2 months ago
Very good
It’s good. This is the first AR pistol/rifle that I have built. 500-600 rounds no issues.
Will definitely buy from PSA again
April 28, 2019
Purchased
2 months ago
Great deal
Classic style and a great deal. It would be a 5 but I’m not a fan of the shockwave blade.
April 27, 2019
Purchased
2 months ago
Quality that far exceeded my expectations! Especially for the price!!
So far 5 stars, without yet having chance to range test. Parts, finish, and build quality all exceeded my expectations for the price. Once PSA finished processing order, I received it like 4 days later, even with a holiday! If you're thinking about going AR pistol build/route, you can't go wrong with PSA! Great service too! Will recommend to friends and will be making more purchases!
My non-SBR, "civvy" Mk18
My non-SBR, "civvy" Mk18
April 23, 2019
Purchased
1 month ago
Must buy!!!
Bad ass gun! Very easy build. When shooting, the gun was spot on and smooth. Thanks PSA!!!
Easy money
Easy money
April 22, 2019
Purchased
3 months ago
Exactly what I wanted. Great quality!
These kits are Great! Great quality for the price! Upper receiver is already assembled for you
Exactly what I expected! Built on Aero Precision lower. Magpul SL hand guard
Exactly what I expected! Built on Aero Precision lower. Magpul SL hand guard
April 22, 2019
Purchased
3 months ago
i have several of these kits and they have all been perfect.
User submitted image
Added Apr 19, 2019
April 19, 2019
Purchased
3 months ago
Put this together on an Anderson lower. Couldn't be happier. Runs all ammo I've tried in both usgi and pmags.
April 16, 2019
Purchased
3 months ago
buy this pistol!
Bought it as a truck gun and now it’s my go to, it eats all that I feed it be it brass or steel! Currently have about 800 assorted brass and 1000 62gr wolf steel with zero failures. I give her a bath after each trip, highest in between cleanings was about 450-500rds of straight suppressed work. Don’t get me wrong the pistol was DIRRRTY, but it just kept sending hate and discontent down range. Firing 62gr brass the ejection pattern is pretty close to 4:00. My father bought the free float model 10.5in pistol and both have now made us lifelong PSA customers.
April 15, 2019
Purchased
3 months ago

Customers Who Viewed This Item Also Viewed