PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride 9" Lightweight M-Lok MOE EPT SBA3 Pistol - 5165449599

More Views

PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride 9" Lightweight M-Lok MOE EPT SBA3 Pistol - 5165449599

In stock

Regular Price: $ 789.99

Special Price $ 549.99

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165449599
UPC: 5165449599
MFR#:

Gas System: Carbine-length
Barrel Profile: A2
Barrel Steel: 4150V Chrome Moly Steel
Barrel Finish: Nitride
Chrome Lining: None
Muzzle Thread: 1/2-28
Chamber: 5.56 NATO
Twist Rate: 1 in 7"
Barrel Extension: M4
Diameter at Gas Block: .750"
Gas Block Type: Low-profile
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6 Aluminum
Receiver Type: A3
Handguard Type: PSA 9" Lightweight  M-Lok
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Lower Receiver: Forged 7075 T6 Aluminum
Receiver Finish: Hardcoat Anodized Black
Fire Control Group: Single-Stage, Enhanced Polished Trigger
Grip: Magpul MOE Grip, Black
Buffer Tube: 7075 T6 Aluminum 
Adjustment: Fixed
Pistol Brace: SB Tactical SBA3 Adjustable Pistol Brace, Black
Magazine: 30 Round Aluminum

Add To:

Barrel: 4150V chrome moly steel. Chambered in 5.56 NATO, with a 1:7 twist rate, M4 barrel extension, carbine-length gas system, and nitride treated for accuracy and durability. A2 profile barrel is finished off with a PSA 9" Lightweight M-Lok free-float rail, .750" low-profile gas block, and A2 Flash Hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized.  These uppers are made for us right here in the USA!

Bolt: Full-auto profile bolt carrier group. Shot-peened, mil-spec Carpenter No. 158® steel bolt. Gas Key Hardened to USGI Specifications, Fastened with Grade 8 screws, and Staked Per Mil-Spec. 8620 steel M-16 profile carrier is chrome lined and phosphate coated.

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber. Finish is hardcoat anodized. Pistol 7075-T6 buffer tube is hardcoat anodized and is fitted with an SB Tactical SBA3 Adjustable Pistol Brace, Magpul Grip, and Enhanced Polished Trigger (EPT). 

**FFL Required

SKU: 5165449599
SKU 5165449599
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165449599

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 17 questions Browse 17 questions and 8 answers
What is the total length of weapon with brace fully extended?
Richard N on Sep 27, 2018
Can you please make this exact setup in 300 blackout? I'll buy 2!!
Dennis M on Sep 20, 2018
Do I need a special license to buy this gun?
Derric P on Dec 24, 2018
BEST ANSWER: This item is registered as a pistol, not a rifle, therefore it is not an NFA item. The buying process would be the same as it would be for buying any handgun such as a Glock, 1911, etc...
What is the total length? Is it 26" or more? That would legally allow a vertical handle which would be nice.
Brian B on Jan 19, 2019
BEST ANSWER: Right at 25inches with the brace removed. Measured from the end of the buffer tube to the crown of the barrel(the barrel- not the end of the flash hider since it isn't pinned)
How long can a pistol be and be legal? This question is for anyone to answer.
Peanut on Oct 8, 2018
BEST ANSWER: In Michigan the OAL is 26"
Will this gun accept .223 caliber rounds?
Ron W on Dec 28, 2018
BEST ANSWER: Yes, it’s chambered in 5.56 which means it can use both 5.56 and .223.
the specifications say 30 rd aluminum magazine but a PMag is shown in the pistol. Which is it?
doyle h on Oct 15, 2018
BEST ANSWER: Mine came with 1 standard aluminum GI magazine, not a pmag.
Can you shoulder this gun ?
DeVontay S on Jan 30, 2019
BEST ANSWER: Can you physically place the brace against your shoulder & shoot it, yes. Legally should you do that? You should ask your local gun shop to see what the rules are in your location.
Anyone know the weight of the various parts of this? Handguard, barrel, bolt etc. Mine weighs just shy of 7 pounds. Wanted to shave some weight but wanted to see where my biggest weight savings would come in.
Gage S on May 4, 2019
Is the bolt carrier group included in this pistol MPI?
Brian H on Apr 14, 2019
I seen the bolt carrier profile says "full-auto". Does this mean this pistol is full auto?
Stanley H on Mar 24, 2019
What is the minimum length of this pistol with the brace fully retracted?
William S on Feb 25, 2019
can i add a vertical for grip to this pistol?
Ladarius P on Feb 13, 2019
if i buy this pistol can i later , put a rifle upper and stock on it later ?
Michael D M on Feb 2, 2019
What is the overall length?
Bernard G on Jan 30, 2019
if i buy this pistol later can i put a rifle upper on it and change to a rifle stock ?
Michael D M on Jan 27, 2019
Does this PSA lower support adding a DIAS?
Daniel G on Jan 15, 2019

Reviews

4.9 / 5.0
7 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
1
0
0
0
I highly recommend. Cleaned, added Magpul angled AFG2, took to range and cycled 250 rounds no problems at all. Great carbine!
February 27, 2019
Purchased
3 months ago
look great
I would give 5 stars but muzzle brake it didnt match. It looks old and have mark around it. other then that it seem good guality and match perfectly lower and upper.it looks great but I dont have time to test yet. Thanks
February 25, 2019
Purchased
3 months ago
For the price, nothing comes close.
This little guy is a home run. I remember ordering it and impatiently waiting for it to arrive at my FFL. And when I got that delivery email I didn't realize how much of a treat I was in for.

First things first, I slapped a Sig Romeo 5 red dot on it, and some nice Tacticon BUIS, threw on some "tacti-cool" gear as some would call it (my mag-lite and finger stop) and zeroed/loc-tited everything in place.

I've already put ~700 rounds through it without a single hiccup. I sh*t you not. As Rob Ski would say with his AK tests, lol. 100 round of which was Federal brass. Then I ran 500 rounds of steel Wolf ammo. The PSA AR churned right through it all and demanded more. My friend also ran some of his mags through it which contained some old, green tips that the little booger zipped right through.

I forgot to mention I also installed a Strike Industries Venom flash hider which I highly recommend. It's not only sweet looking but literally eliminates any flash. I couldn't believe how effective it was with the 10.5 barrel.

The EPT is very nice, so light and crisp. The SBA3 is hands down the best pistol brace out there. The floating M-Lok handguard is totally killer and I love MOE grips. Have one on my AK47 as well and the thumb indentions are amazing.

Everyone that's shot it loves it. In fact, the only negative to this gun, is the fact it's always out of stock. I had to eye ball their page to snatch it up. Totally worth it.

All in all, for an AR pistol, you'd be hard pressed to find anything this nice especially for the price. She's super reliable, throws a nice middle finger to the ATF, and supports a local American company. What more could you possibly want?
Love this thing
Love this thing
February 17, 2019
300 flawless rounds fired!
I recently purchased the PSA 10.5" CARBINE-LENGTH 5.56 NATO 1/7 NITRIDE 9" LIGHTWEIGHT M-LOK MOE EPT SBA3 PISTOL after reading the BATF issued a letter stating the use of the SBA3 stabilizing brace for shoulder fire does not make it a short barreled rifle.

The reports I read said that a 10.5" barrel in 5.56mm was the shortest you could still use a "carbine system" on and still be reliable. While PSA makes economical weapons, they seem to have a good reputation for quality and excellent customer service (and Lifetime warranty!). The weapon is just over 26" long with the stock fully collapsed and shoulders very nicely when fully extended, although the length of pull is about one inch shorter than my Colt M4A1 when fully extended.

Fit of the weapon is excellent, while the finish was less impressive. The charging handle and free-float handguard both had dings where the finish is missing. Not rub marks and beaten up like some Colt and LMT carbines are when shipped, but definitely something I would expect to be caught by quality control. Still, given the price, I'm fine with the finish and as I stated, the fit is excellent.

On the first trip to the range, I fired 300 rounds of PMC M193 mil-spec ammo. I used both Center Industries USGI and Magpul M2 PMAGS magazines without any issued. The Sig Sauer Romeo5 micro dot zeroed easily as well and was bright enough to still be seen, even in direct sunlight.

Overall, I am very impressed with the AR-15 pistol. We'll see how it holds up with increased range time, but it's off to a solid start. Still not sure if I would take a high-round count class or not. But even one of my "high-end" carbines had trouble in a Viking Tactics class (ammunition related though).

Be Safe!
January 21, 2019
PSA 10.5 pistol
I’ve been reading and going to gun shop/shows for a while now looking to get a 5.56 pistol. I’m very happy with this weapon. For the money there is absolutely nothing close to PSA. I also like the fact that it all done in house at PSA. American made!
December 19, 2018
PSA 10.5" pistol is outstanding
I've only sot 60 rounds through it for sighting it in at 25yds and the gun went BANG each time. Works well so far. Looking forward to dialing it in & doing some serious work on the range.
December 18, 2018
Purchased
6 months ago
Just right!
Wish I had had this in VN. Great weight, handy, and works like a charm. Very pleased.
October 21, 2018
Purchased
8 months ago

Customers Who Viewed This Item Also Viewed