• Compare
    Compare Products

    You have no items to compare.

  • 0 Cart
  • Home /
  • PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride MOE SBA3 Pistol Kit, FDE
PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride MOE SBA3 Pistol Kit, FDE

More Views

PSA 10.5" Carbine-Length 5.56 NATO 1/7 Nitride MOE SBA3 Pistol Kit, FDE

In stock

Special Price $ 399.99

Regular Price: $ 539.99

Quick Overview

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165458535
UPC: 5165458535
MFR#: 5165458535
  • 10.5" Barrel Length
  • Carbine Gas System
  • Nitride Barrel
  • 5.56 NATO Chamber
  • 1 in 7" Twist Rate
  • MOE Carbine Handguards, FDE
  • F-Marked Front Sight Post
  • A2 Flash Hider 
  • Forged Upper Receiver
  • Carpenter 158 BCG & Charging Handle
  • SBA3 MOE Pistol Lower Build Kit, Flat Dark Earth

Add To:

Share:

Barrel: Chrome-moly barrel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. This barrel nitride treated for accuracy and durability and is finished off with a MOE Flat Dark Earth carbine-length handguard, F-Marked gas sight base, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Lower Build Kit:  Features Single stage mil-spec fire control group, Magpul Grip, Magpul Trigger Guard, and black oxide coated hammer and trigger springs. Also includes SB Tactical SBA3 Adjustable Pistol Brace, castle nut, latch plate, carbine buffer spring, 5 positioning mil-spec buffer tube, and standard carbine buffer.

SKU: 5165458535
SKU 5165458535
Department Uppers
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165458535

Questions and Answers

Powered by TurnTo
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 11 answers
How many mags should I buy if I get this? I do not want to run out of mags.
nite f on Jun 8, 2019
BEST ANSWER: You should buy infinity mags, that way you can be sure not to run out.
I don't see a charging handle. I know I need to purchase a BCG, but what else do I need to complete the upper?
THOMAS A on Jun 6, 2019
BEST ANSWER: It says it includes the bolt carrier group and charging handle. You'll need a stripped lower, rear sight or red dot, and magazine for a complete pistol.
The red box above says "Federal NFA regulations are applicable". I thought that Pistol (and kits for them) were not NFA regulated?
Steve L on Jun 7, 2019
BEST ANSWER: The barrel length is less than 16 inches so you'll need a pistol lower not a rifle lower. Otherwise it would be an SBR.
Is this all the pieces you need to build?
Givon J on Jun 11, 2019
BEST ANSWER: Everything you need is there for a complete build except your stripped lower receiver , a rear sight or optics of your choice and of course a magazine and ammo. Assemble and sight it in ... and enjoy.
What would be a compatible rear sight for the tower front sight on this kit?
Bob W on Jun 8, 2019
BEST ANSWER: Any rear sight for same plane sight systems, so carry handle, magpul mbus, or like pretty much any ar15 fixed or folding sight. Or a red dot optic of some sort. Buyers choice.
Which lower receiver do I need?
Stephen on Jun 16, 2019
BEST ANSWER: Any stripped AR-15 Lower receiver. Just search on PSA website for stripped lowers and you will find one that suits you. Of course you don't have to use a PSA receiver but fit and finish may be better.
Which manufacture is this by chance? You tend to have some FN surplus and wondered if this was one of them.
Wolf C on Jun 16, 2019

Reviews

Powered by TurnTo
4.8 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
1
0
0
0
Great kit! Cool setup for the money.
Installed a piston conversion on this kit,and after a little extra lube, works great. Cleaned the excess off and still working great. Good buy!
August 12, 2019
Purchased
 4 months ago
Great Pistol kit !
As always with PSA, great service, timely delivery, and quality. Was my first build and fires flawlessly.
August 11, 2019
Purchased
 4 months ago
Awesome Kit
I purchased this for my first build. I built this on an Anderson lower. I was extreme impressed with the finished pistol. I had no problems at all. Fit and finish was perfect. I think it took me about an hour to put it together. I did upgrade the trigger as the supplied trigger came in at about 6lbs. Function was perfect. This pistol is a little tack driver at 50 yards and is real good at 100 yards. Buy this kit. PSA is a great company. Support them!
Great Build
Great Build
August 9, 2019
Purchased
 4 months ago
Great pistol....
Love it, shoots great.
August 7, 2019
Purchased
 4 months ago
good product
happy with my purchase have not tried it out yet love the look
August 5, 2019
Purchased
 4 months ago
Excellent!!
Awesome pistol build for my wife. She loves it. I just need to get optics for it now.
With all of the magpul accessories on it, you can't beat the price.
July 23, 2019
Purchased
 4 months ago

Customers Who Viewed This Item Also Viewed

Go Top

DEAL BLAST
© 2019 Palmetto State Armory. All Rights Reserved.