ar-15 pistol kit for sale

More Views

PSA 10.5" Carbine-Length 5.56 NATO 1/7 Phosphate MOE EPT SBA3 Pistol Kit - 5165449455

In stock

Special Price $ 379.99

Regular Price: $ 629.99

Quick Overview

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165449455
UPC: 5165449455
MFR#: 5165449455
  • 10.5" Barrel Length
  • Carbine Gas System
  • Phosphate Coated Barrel
  • 5.56 NATO Chamber
  • 1 in 7" Twist Rate
  • MOE Carbine Handguards, Black
  • F-Marked Front Sight Post
  • A2 Flash Hider 
  • Forged Upper Receiver
  • Carpenter 158 Nitride BCG & Charging Handle
  • SBA3 MOE ETP Pistol Lower Build Kit, Black

Add To:

Barrel: Chrome-moly barrel. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a carbine-length gas system. This barrel is phosphate coated and finished off with a MOE carbine-length handguard, F-Marked gas sight base, and A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Lower Build Kit:  Features Enhanced Polished Trigger (EPT), Magpul Grip, Magpul Trigger Guard, and black oxide coated hammer and trigger springs. Also includes SB Tactical SBA3 Adjustable Pistol Brace, castle nut, latch plate, carbine buffer spring, 5 positioning mil-spec buffer tube, and standard carbine buffer.

SKU: 5165449455
SKU 5165449455
Department Uppers
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Unit Price N/A
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165449455

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 10 questions Browse 10 questions and 14 answers
When will this be back in stock?
TacoBill on May 6, 2019
Is the bolt included? I don’t see it
James M on Sep 6, 2018
BEST ANSWER: It says it comes with a "Carpenter 158 Nitride BCG & Charging Handle". Just have to read sometimes.
What else do I need to purchase to make it a complete pistol?
TITUS Y on Sep 5, 2018
BEST ANSWER: You need a stripped lower receiver and a rear sight.
Has this kit been discontinued?
Richard P on Jul 18, 2019
Is the barrel chrome lined?
Steve on Sep 11, 2018
BEST ANSWER: No
Does this use .750 diameter gas block? I want to replace the FSB with a gasblock so I can run a longer rail.
jon s on Sep 12, 2018
BEST ANSWER: Yes.
Is this kit when fully done long enough to have a vertical foregrip?
Konnor W on Oct 1, 2019
BEST ANSWER: I don’t believe so, I think the minimum length requirements with a fully extended brace would be a 14.5” barrel. I’m relatively confident in this because that’s my next project, but I’ll still need to double check, and you should do the same.
What type of handguard retaining plate is used? Round or triangular
John q publick on Oct 13, 2018
BEST ANSWER: Its round
Does this come with pins for the lower receiver?
Fractured_past on Oct 12, 2018
BEST ANSWER: yes, all the pins, springs, detents needed are included; everything except lower receiver.
Why will this kit not ship to mass there are no laws against it?
John D on Nov 7, 2018

Reviews

4.7 / 5.0
44 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
36
5
1
2
0
Wife likes it...
I bought this kit for my wife who expressed an interest in my own PSA 10.5" AR pistol. I offered to give her mine, but she declined. So I ordered the kit and used an on-hand Anderson stripped lower receiver. Everything went together without a hitch. The trigger that comes with this kit is considerably "nicer" than most MILSPEC triggers we have. She wasn't aware that the "stock" was actually a brace, and when I showed her how it was intended to be used she thought it was STUPID. The chamber on this kit seems to be like the one I have now... which is to say that it's a little "short" between the shoulder and bolt head during full lock up. It passes headspace gage testing fine, but it's just a tad on the "short" side, which shouldn't be a problem for anybody unless they're shooting handloads and didn't push case shoulders back far enough. If you do this, just make sure the reloads are checked with a gage. Something about the Anderson lower won't permit the usage of a CMMG .22 rimfire adapter bolt. It works fine on my gun, which uses a PSA lower. But this isn't PSA's fault and doesn't reflect in any way in this review. I'm merely mentioning it in case somebody else uses an Anderson lower. She's fired the gun twice now. The first time, the first magazine experienced half a dozen or so malfunctions. These were varied. One was a double-feed, one was a failure to feed, and I "think" the rest were light strikes. I began to wonder if the hammer spring was just a little weak. The second time she fired it however, it experienced one malfunction during the entire session. That one was a failure to fire. Everything is still fairly "gritty" and I don't expect flawless reliability until it's been fired a couple of hundred times. It's short, accurate, and easy to use. Because of this, she prefers it over the standard length carbine. It's much better suited for shorter stature, shorter armed people.
June 4, 2019
Purchased
6 months ago
Modern Retro build
Very happy with my PSA 10.5” pistol build kit. It’s worth every penny. This thing runs flawlessly. I would definitely buy another and would definitely recommend to others. PSA is very underrated for the quality of their products.
Tried a green laser sight on it, but wasn’t feeling it.
User submitted image
User submitted image
Modern retro look
User submitted image
June 2, 2019
Purchased
6 months ago
Good kit
No problems. Works great.
May 30, 2019
Purchased
6 months ago
Great kit, went together perfectly ( with right tools)
Wanted to go for that old school Vietnam SOG look, with a modern twist., added a colt carry handle I had and instantly I had the perfect truck gun. Guys seriously, all Magpul furniture, SB adjustable Brace.... what more can you ask for at this price. Runs great, no issues, is it a Daniel Defense , no but you can get 4 of these for the same price and it goes bang every time so Im very happy.
Kit went together easily,  no issues at all.  Added a carry handle/rear sight from an older colt.
Kit went together easily, no issues at all. Added a carry handle/rear sight from an older colt.
January 24, 2019
Purchased
10 months ago
Give It A Try
Awesome kit. Finished it with an Anderson lower and the fit was phenomenal. Zero issues. I continue to be surprised with the quality, reliability and accuracy of PSA components.
January 22, 2019
Purchased
1 year ago
Shoots tulammo 55 steel case and 62 gr green tip
User submitted image
User submitted image
January 18, 2019
Purchased
10 months ago
Great product every thing fit well and shoots great. Better than expected for a short barrel
January 17, 2019
Purchased
10 months ago
What a great Compact AR15 and it shoots great ad accurate
I bought this because I watched a review in one and pulled the trigger. I’m glad I did. It went together very easy and it shoots great. I put a Romeo 5 on it and wow I couldn’t be more pleased with my purchase and better yet 2 1/2 group at 50yrds. Thanks PSA.
First time out and standing. Know rest I think i can do better
First time out and standing. Know rest I think i can do better
December 26, 2018
Purchased
10 months ago
7 PSA build to date...
What can I say... It's a great kit... And an even bigger value. Got here in less than a week... And shoot big ol' fireballs.
User submitted image
Added Dec 18, 2018
December 18, 2018
Purchased
11 months ago
Was a great deal and good quality
December 9, 2018
Purchased
11 months ago

Customers Who Viewed This Item Also Viewed