PSA 10.5" CHF Carbine Length 5.56 NATO 1:7    9'' Lightweight M-Lok Railed Upper - Without BCG or CH - 5165448674

More Views

PSA 10.5" CHF Carbine Length 5.56 NATO 1:7 9'' Lightweight M-Lok Railed Upper - Without BCG or CH - 5165448674

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

It is the customer's responsibility to be aware of all applicable laws and regulations regarding the purchase and ownership of uppers with a barrel length of less than 16". Federal NFA regulations are applicable to this item.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165448674
UPC: 5165448674
MFR#: 5165448674

Barrel Length: 10.5"
Gas System: Carbine Length
Barrel Profile: A2 Style
Barrel Steel: Cold Hammer Forged Chrome Moly Vanadium
Barrel Finish: Phosphate
Chrome Lining: Yes, bore and chamber
Muzzle Thread: 1/2-28
Chamber: 5.56 NATO
Twist Rate: 1:7
Barrel Extension: M4
Diameter at Gas Block: .750
Gas Block Type: .750 Low Profile 
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: PSA 9" Lightweight M-Lok Rail
Bolt Carrier Group Included: No
Bolt Steel: N/A
Bolt Carrier Profile: N/A
Charging Handle Included: No
Overall Length: 19"

Add To:

Barrel: Barrel is made for Palmetto State Armory by FN Manufacturing using their proprietary blend of hammer forged chrome molly vanadium that is referred to as "Machine Gun Steel" by virtue of its use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension with extended feed ramps, and a carbine gas system. The barrel has an A2 style profile, is Mil-spec phosphate coated, and MPI/HPT tested. The upper is finished off with a  .750" low profile gas block, Palmetto State Armory 9" Lightweight Free Float Rail, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is made to MIL-SPECS and hard coat anodized black for durability. Featuring machined T marks, and a mil-spec finish. These uppers are made for us right here in the USA by a mil-spec manufacturer.

Each upper is assembled to order with care, and test fired.

**Upper Does Not Include BCG Or Charging Handle

SKU: 5165448674
SKU 5165448674
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165448674

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 27 answers
I understand the gasblock is not adjustable, but has anyone run a suppressor on these uppers? Results?
New AR Pistol on Oct 25, 2018
PSA 10.5
PSA 10.5" CHF Carbine Length 5.56 NATO 1:7 9'' Lightweight M-Lok Railed Upper - Without BCG or CH - 5165448674
PSA 10.5
PSA 10.5" 5.56 NATO 1:7 Nitride 9" Lightweight M-Lok Freedom Upper With BCG & CH - 516446396
PSA 10.5
PSA 10.5" 5.56 NATO 1/7 Nitride 9" Lightweight M-Lok Freedom Upper With BCG & CH
BEST ANSWER: Yes, I routinely run a SilencerCo 7.62 SpecWar (with flash-hider QD) on the 10.5" nitride upper. No problems at all.
Just getting in to ars does this have to go on to a pistel lower?
Ashtontim on Apr 14, 2019
BEST ANSWER: Not a lawyer. Yes to build as a pistol it must go on a lower purchased as a pistol or “other”. Unless you are building an SBR and already have the tax stamp.
What is the total weight of this item?
Zee A on Jun 24, 2019
Is the flash hider pinned and welded?
alexander r on Feb 8, 2019
BEST ANSWER: No, you can remove the flash hider. Keep in mind, this should be used with a pistol lower or a SBR with a tax stamp.
is the gas block pinned?
jared c on Jun 25, 2018
BEST ANSWER: good question. no, its not. the barrel is dimpled on the bottom with 2 set screws. i prefer pinned as well, it's much stronger.
Should this barrel have any markings on it designating that it’s an FN CHF barrel? I purchased it but do not see any markings on it. My CHF rifle uppers have it marked on the barrel.
Derek S on Mar 13, 2019
BEST ANSWER: Mine is marked with the FN logo and “CHF” on the top of the barrel just in front of the chamber.
Anyone who has run this upper for a while, I’ve heard they get really hot. I’ll regularly run a couple hundred rounds when I’m training. There is only 1 mlok slot at 3 so not much room for rail guards. Is heat an issue on these uppers ? Also how is the gas blowback when running suppressed ?
Eric W on May 15, 2019
BEST ANSWER: The heat is no worse than any other AR with similar rail. It is more than you will perceive from a plastic MLOK handguard. Can’t answer the blowback.

Reviews

4.3 / 5.0
12 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
4
2
0
0
Great upper minus color difference in handguard and upper. Sleezy tactics by PSA
Great upper. Worked wonderfully on the Franklin armory binary trigger pistol lower I had.
Finish of handgaurd and upper were different colors so my gun has 3 different off black colors. (the lower isn't PSA's fault, different company)
My biggest complaint is they dropped the price by $50 a few days later and wouldn't refund the difference.
They have the Norton price guarantee which seems to apply to me (sent in for refund and we'll see) but Norton says the sku has to be the same and no promo code can be used. If familiar with PSA, they randomly make new identical products with different skus and they require codes on alot.
It's a lot of crap. If I wanted to play games, I'd pull out monopoly and do so.
Seriously looking to purchase stuff elsewhere now on
User submitted image
Added Jun 17, 2019
June 17, 2019
PSA Logo on Receiver
This is really good quality where it counts and the price is great. After shooting I noticed the handguard had rotated slightly-- not good if you mount a sight to the front. I removed the handguard, cleaned the grease off of the barrel nut and reinstalled using loctite on the screws. So far, that solved the problem and is a minor issue.

I just wish this did not have the PSA cannon logo on the outside of the receiver. PSA is a great company and I appreciate your products, but I really dislike your logo which appears cartoonish to me. I wish I could opt out of having it on products I purchase from you.
May 26, 2019
Purchased
3 months ago
10.5 in. CHF upper
.Nice upper good quality M-Lok is much lighter than the 7.5 quad that I replaced haven't taken it to the range yet but will soon.
May 26, 2019
Purchased
3 months ago
Whats not to like ?
I gotta say, the CHF CL FN marked Barrel put me over the edge of the fence for a pistol build.

All of the upper was assembled properly, right out of the box... I double checked.
May 18, 2019
Purchased
2 months ago
Fantastic
Perfect, couldn’t be happier . Nice and neat. The whole project turned out better than expected.
May 3, 2019
Purchased
4 months ago
Great barrel. Everything else mediocre.
Handguard finish doesn't nearly match the upper finish. Barrel not dimpled for gas block set screws. Aluminum barrel nut. You're paying for a barrel only.
March 20, 2019
Purchased
4 months ago
Thumbs up with a twist
After shooting this upper I'm pretty happy. Too much fun its a flat shooter, very reliable, and extremely tough. At first glance I wasn't thrilled with the handguard finish. PSA get rid of the glossy finish. Bought mlok covers with handstop so no big deal.
March 16, 2019
Good but slight QC problem.
After receiving my upper, I threw in an fnh BCG and took it out to the range in 5°f weather and ran 300 rounds of steel case and reman brass ammo. It ran flawlessly without a hiccup. However, when I got it home and started breaking it down to clean, I noticed the gas block had been creeping forward on the barrel. And the rail was loose. I'm surprised it still ran reliably with this issue. I just re tightened and staked the gas block set screws to insure they won't be backing out any time soon, re tightened the rail and took it out again the next day. So far no more issues. Would have given 5 stars but the loose gas block annoys me. However, this seemed to be a minor problem with an easy fix. I have another upper from PSA with the nitride barrel with over 1000 rounds through it with no issues so I'm assuming I just got a lemon. It happens.
User submitted image
Added Feb 7, 2019
February 7, 2019
Response from Palmetto State Armory
We do apologize for that. Please contact Customer Service so we may resolve this issue.
February 7, 2019
Casey S
The FN machine gun steel is what really sold me on this setup.
The barrel is great, the m-lok handguard is awesome as well. Has flush cups for a qd sling machined into it on both sides.
My pistol setup.
My pistol setup.
August 24, 2018
Purchased
1 year ago
Awesome upper! This was going to be my “MK18 clone” build and I planned to purchase a geisselle rail but after getting a hold of it, this palmetto M-lok is rock solid, zero movement at all and it seems like the barrel nut is extra long and allows the rail to lock in firm. Can’t go wrong with the FN CHF barrel, definitely worth the price.
July 20, 2018
Purchased
1 year ago

Customers Who Viewed This Item Also Viewed