Out of stock
PSA PA-15 16" Nitride A2 Mid-Length 5.56 NATO MOE AR-15 Rifle, Black
Out of stock

PSA PA-15 16" Nitride A2 Mid-Length 5.56 NATO MOE AR-15 Rifle, Black

Details
SKU 5165458949
Brand Palmetto State Armory
descriptionProduct Manual
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

  • Barrel Length: 16"
  • Barrel Material: 4150V Chrome Moly Vanadium Steel
  • Barrel Profile: A2 Style
  • Chamber: 5.56 NATO
  • Twist Rate: 1 in 7”
  • Extension: M4
  • Gas System: Mid-Length
  • Gas Block Type: F-marked Front Sight Base
  • Upper Receiver: Forged 7075 T6 Aluminum
  • Receiver Style: M4 flat top with feedramps
  • Receiver Finish: Hardcoat Anodized
  • Forward Assist: Yes
  • Dust Cover: Yes
  • Handguard Type: Polymer
  • Handguard Style: Magpul, Black
  • Handguard Length: Mid-Length
  • Bolt Steel: Carpenter 158
  • Bolt Carrier Steel: 8620
  • Staked Gas Key: Yes
  • Lower Receiver: Forged 7075 T6 Aluminum
  • Receiver Finish: Hardcoat Anodized
  • Fire Control Group: Single-Stage, Enhanced Polished Trigger (EPT)
  • Buffer Tube: 7075 T6 Aluminum 
  • Stock Adjustment: 6-position
  • Stock: Magpul Carbine Stock, Black
  • Length: 33"
  • Weight: 6.5 lbs.
  • Magazine: 30 Round Aluminum Black
  • Includes: Magpul MBUS Rear Sight, Black

Features

Barrel: Chrome Moly steel. Chambered in 5.56 NATO, with a 1:7 twist rate, M4 barrel extension, and a mid-length gas system.  Barrel is finished off with a black Magpul MOE Mid-Length handguard, F-Marked gas sight base, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized.  Uppers include forward assist and dust cover.  These uppers are made for us right here in the USA by a Mil-Spec manufacturer.

Bolt: Full-auto profile bolt carrier group.  Shot-peened, mil-spec Carpenter No. 158® steel bolt.  Gas key hardened to USGI Specifications, fastened with grade 8 screws, and staked per Mil-Spec. 

Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for caliber. Finish is hardcoat anodized.  Mil-Spec diameter 7075-T6 buffer tube is hardcoat anodized, has six adjustment positions, and is fitted with a Magpul MOE  Carbine Stock. The grip and trigger guard are Black MOE components and the fire control group is a PSA Enhanced Polished Trigger (EPT) single-stage assembly.

Includes: Magpul MBUS Rear Sight, Black

Reviews

Q & A

Retail Stock

Warranty

AMERICAN MADE. FOR LIFE.

Flag

Full Lifetime Warranty.

Palmetto State Armory firearms are covered by an industry leading Full Lifetime Warranty. This extends beyond the original purchaser. We want the person who bought a great quality firearm at an excellent price to have comfort in knowing that no matter what, the firearm can be fixed at no additional cost.

This includes shipping both ways.

We strive for excellence all the way through production and hope customers never have to use this warranty but we also pride ourselves in 99% non-repair/return ratio. It is there for peace of mind so that the consumer can be confident in their purchase. Should the consumer ever need to contact us regarding a repair under the warranty, simply use our contact form or give us a call at (803) 724-6950.

Palmetto State Armory firearms and parts are backed by our Full Lifetime Warranty. Our PSA firearms and parts are warranted to be free from defects in materials and craftsmanship for the serviceable lifetime of the firearm or part.

For the Life of our product

The liability of Palmetto State Armory under this warranty shall be limited solely to the obligation to repair or replace the firearm/part or defect at its discretion, and to pay transportation and insurance charges for return of the firearm to the owner for a rightful warranty claim. This warranty is transferable for the serviceable lifetime of the firearm or part. Modification of firearm will void this warranty. This warranty does not cover normal wear or any damage resulting from careless handling, neglect, repairs and adjustments, corrosion, improper, substandard or defective ammunition.

What we don't cover

Under no circumstances shall Palmetto State Armory be responsible for incidental or consequential damages with respect to economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. Palmetto State Armory will not be responsible for the results of careless handling, unauthorized adjustments, defective, low-quality, reloaded, or improper ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use.

Initiating a claim

To initiate a Warranty claim, call Palmetto State Armory Customer Service:

Hours: Monday through Friday, 9am - 6pm EST Email: Contact Form
  1. Customer service will issue an RMA number to allow for the return of the firearm.
  2. Warranty claims must have this RMA filled out, and included in the box with the firearm or part.
  3. The firearm or part concerned must be shipped using the prepaid label our representative emails to you.

Palmetto State Armory will pay shipping and insurance charges for the return of a firearm or part to its owner or FFL, if the related claim is a proper claim for warranty work. If Palmetto State Armory is unable to fix the original serial number, a new one will be sent out, but must go to an FFL for transfer back to the customer. Another background check will be completed at the time of transfer. Palmetto State Armory is not responsible for transfer fees at the FFL.

Loading...