Due to pending legislation and until further legal notice, PSA will prioritize all orders shipping to Washington State.
*This excludes PSA Partnered Fulfilled Items.
PSA Gen2 KS-47 16" Carbine-Length 7.62x39 1/10 Nitride 15" M-Lok MOE EPT Rifle with TC-E Extractor
|Brand||Palmetto State Armory|
Barrel Length: 16"
Barrel Profile: Mid-weight
Barrel Steel: 4150
Barrel Finish: Nitride
Chrome Lining: No
Muzzle Thread: 5/8-24
Twist Rate: 1 in 10"
Barrel Extension: KS47 Gen2 Single-Large Feed Ramp
Gas System Length: Carbine
Diameter at Gas Block: .750"
Gas Block Type: Low Profile
Muzzle Device: A2-Style
Receiver Material: Forged 7075 T6
Receiver Type: KS-47
Handguard Type: PSA 15" Lightweight M-Lok Free Float Rail
Bolt Carrier: Gen2 TC-E KS-47 BCG with Toolcraft Enhanced Extractor
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Semi-Auto
Fire Control Group: PSA Enhanced Polished Trigger (EPT)
Grip: Magpul MOE Grip, Black
Stock: Magpul MOE Stock, Black
Buffer Tube Length: Carbine
Buffer Tube Diameter: Mil-spec
The Palmetto State Armory KS-47 G2 is based on the AR-15 and combines the modular construction, accuracy, and precision of the AR platform with the stopping power and the magazine options of the AK. The KS-47 G2 lets the AK shooter capitalize on their inventory of AK magazines and AK ammo with an AR-style platform. Unlike the AK, where the barrel is permanently pressed into the receiver, the KS-47 G2 features an AR-style modular configuration which consists of a barreled upper receiver, and a lower receiver that houses the fire control group and magazine. The modular configuration allows customers to have several different barrel configurations with one lower receiver, just by releasing two pins.
Lower: The 7075-T6 forged lower receiver is hard coat anodized, and accepts standard AR-15 fire control groups. The extended magazine release is outside of the trigger guard for safety, which allows for an AK-style release movement but also features oversize side paddles for fingertip release by the trigger finger. The KS-47 G2 receiver also accepts standard AR buffer tubes. The KS-47 G2 lower has steel reinforcements to accept AK style surplus magazines including drum-style. This Gen2 design features a PA-10 carbine buffer spring and heavy H1 buffer to ensure reliable operation with a wide variety of aftermarket and surplus magazines. Through extensive testing, we have determined that we can only guarantee the reliability of the KS47 G2 platform with the PA10 carbine buffer spring and heavy H1 buffer. The KS-47 G2 Lower will accept most aftermarket fire control groups (Geissele, etc.). However, due to the magazine catch geometry, one-piece drop-in triggers such as CMC style triggers will not function in KS-47 G2.
Upper: The KS-47 G2 upper receiver is precision machined out of forged 7075 T6 aluminum, and then hard coat anodized for durability. While retaining the look of a standard M4 upper, the KS-47 G2 upper is designed to work with the new Gen2 KS-47 lower. The upper features integrated over-insertion tabs to prevent the bolt from dragging on the magazine. This CMV 4150 barrel is chambered in 7.62x39 with a 1 in 10 twist and has a single, large feed ramp to accommodate the larger case diameter of the 7.62x39 round. The barrel is nitride treated for accuracy and durability and is finished off with a 5/8-24 thread A2-style compensator. The forward assist, dust cover, charging handle, and safety are all standard AR-15. This KS-47 G2 upper is finished off with a PSA 15" Lightweight M-Lok Free Float Rail. The KS-47 G2 upper will not work with a standard AR-15 lower.
BCG: The new TC-E KS-47 Bolt carrier group features a new and improved Toolcraft enhanced extractor for durability. Featuring an extended firing pin and designed to work with AK-47 magazines, the carrier is made of nitride-treated 8620 steel, and the gas key is attached with grade 8 bolts and properly staked. The bolt has been redesigned to function properly with most AK-47 magazines. The bolt is mag phosphate coated Carpenter 158 steel.
Magazine: The KS-47 G2 comes with one Magpul 30 round AK-47 magazine (where allowed by law). The new Gen2 KS-47 has been tested and is guaranteed to work with the following AK-47 magazines:
- Magpul AK-47 Pmag
- Romanian Stick Magazine
- Romanian Drum Magazine
- Chinese Drum Magazine
- Chinese Stick Magazine
- Korean Drum Magazine
- Korean Stick Magazine
- Yugoslavian Stick Magazine
- Bulgarian Stick Magazine
- Circle10 Stick Magazine
- Hungarian Stick Magazine
- Russian Stick Magazine
** Due to the unique geometry required for the KS-47 G2 BCG to function, ALL other magazines will not be guaranteed to work. If you are using a magazine not listed above, no warranty claims will be accepted for magazine functioning issues.
KS-47 Gen1 & Gen2 Compatibility:
The KS-47 G2 uppers and lowers will function with the KS-47 G1 uppers and lowers. However, if any KS-47 G1 parts are used, all of the improvements of the KS-47 G2 may not be optimized. We recommend using Magpul AK-47 Magazines on any KS-47 that is a combination of Gen 1 and Gen 2 parts.
Q & A
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Magazines will be removed from firearms when shipping to states with magazine capacity restrictions.
Full Lifetime Warranty.
Palmetto State Armory firearms are covered by an industry leading Full Lifetime Warranty. This extends beyond the original purchaser. We want the person who bought a great quality firearm at an excellent price to have comfort in knowing that no matter what, the firearm can be fixed at no additional cost.
This includes shipping both ways.
We strive for excellence all the way through production and hope customers never have to use this warranty but we also pride ourselves in 99% non-repair/return ratio. It is there for peace of mind so that the consumer can be confident in their purchase. Should the consumer ever need to contact us regarding a repair under the warranty, simply use our contact form or give us a call at 877-560-7229.
Palmetto State Armory firearms and parts are backed by our Full Lifetime Warranty. Our PSA firearms and parts are warranted to be free from defects in materials and craftsmanship for the serviceable lifetime of the firearm or part. All Palmetto State Armory barrels are machined and guaranteed to be concentric with the bore of our barrels.
For the Life of our product
The liability of Palmetto State Armory under this warranty shall be limited solely to the obligation to repair or replace the firearm/part or defect at its discretion, and to pay transportation and insurance charges for return of the firearm to the owner for a rightful warranty claim. This warranty is transferable for the serviceable lifetime of the firearm or part. Modification of firearm will void this warranty. This warranty does not cover normal wear or any damage resulting from careless handling, neglect, repairs and adjustments, corrosion, improper, substandard or defective ammunition.
What we don't cover
Under no circumstances shall Palmetto State Armory be responsible for incidental or consequential damages with respect to economic loss or injury to property, whether as a result of express or implied warranty, negligence or otherwise. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. Palmetto State Armory will not be responsible for the results of careless handling, unauthorized adjustments, defective, low-quality, reloaded, or improper ammunition, corrosion, neglect, ordinary wear and tear, or unreasonable use.
Initiating a claim
To initiate a Warranty claim, call Palmetto State Armory Customer Service:
- Customer service will issue an RMA number to allow for the return of the firearm.
- Warranty claims must have this RMA filled out, and included in the box with the firearm or part.
- The firearm or part concerned must be shipped using the prepaid label our representative emails to you.
Palmetto State Armory will pay shipping and insurance charges for the return of a firearm or part to its owner or FFL, if the related claim is a proper claim for warranty work. If Palmetto State Armory is unable to fix the original serial number, a new one will be sent out, but must go to an FFL for transfer back to the customer. Another background check will be completed at the time of transfer. Palmetto State Armory is not responsible for transfer fees at the FFL.