PSA GEN2 PA10 Complete Classic Lower Receiver - 77932912

More Views

PSA GEN2 PA10 Complete Classic Lower Receiver - 77932912

TEMPORARILY OUT OF STOCK

Quick Overview

Must be 21 or older to purchase.

If you live in California, please read this notice before ordering.

WARNING: Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 77932912
UPC:
MFR#: 77932912

PSA PA10 .308 Gen2 Complete Classic Lower Receiver  

Machined from Aluminum Forgings 7075-T6
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
Milspec diameter PA10 6-position Receiver Extension
AR15 fire control group
Staked M4 Lock Nut
Standard Heavy Carbine Buffer
M4 Style Stock
A2-style Grip
For use with PA10 Gen2 Uppers

The Gen2 PA10 receivers are functionally compatible with the Gen1 receivers, however we recommend matching Gen2 lowers to Gen2 uppers for best appearance.  There are external cosmetic differences when mixing gen1 and Gen2 upper and lower receivers that some may not find appealing.  

The AR10 platform does not enjoy a common design between manufacturers, like the AR15.    As a result, there can and will be subtle differences in the parts kits of various manufacturers.  Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading.  For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers.  We do not recommend using other manufacturers parts in our products.

Add To:

New and improved Palmetto State Armory PA10 Gen2 308 lower is fully assembled and ready for your complete PA10 Gen2 Upper!

With streamlined styling and improved function, the new and improved PSA PA10 is here.  The Gen2 model offers enhanced chambers and extraction. with a more modern appearance.  

Precision machined from forged 7075-T6 aluminum, these lowers are then Black anodize hardcoated to MIL-8625 Type 3 class 2.   With an AR-15 style fire control group, and stock and grip options, the PSA PA10 allows the same configuration flexibility as enjoyed by the AR15, and is an ideal platform for the 308 cartridge. 

Machined from Aluminum Forgings 7075-T6
Hardcoat Anodizing: MIL-A-8625F, Type III, Class 2
Milspec diameter PA10 6-position Receiver Extension
Standard AR15-style fire control group
A2-style grip
M4-style Stock
Staked M4 Lock Nut
Standard Heavy Carbine Buffer
Caliber: .308

 The Gen2 PA10 receivers are functionally compatible with the Gen1 receivers, however we recommend matching Gen2 lowers to Gen2 uppers for best appearance.  There are external cosmetic differences when mixing gen1 and Gen2 upper and lower receivers that some may not find appealing.  

The AR10 platform does not enjoy a common design between manufacturers, like the AR15.    As a result, there can and will be subtle differences in the parts kits of various manufacturers.  Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading.  For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers.  We do not recommend using other manufacturers parts in our products.

PLEASE NOTE:  We are not accepting phone orders on this item. Lowers may take up to 10 BUSINESS DAYS to ship from receipt of FFL information. Please help us help you by ensuring your FFL is sent in as soon as possible.

Please make sure the business name of the FFL you will be using is on your order.

SKU: 77932912
SKU 77932912
Brand Palmetto State Armory
Department Firearms - Receivers
Daily Deal No
Daily Deal Expires No
Unit Price No
Youtube Video No
Free Shipping? No
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 77932912

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 53 questions Browse 53 questions and 179 answers
Am I able to get this shipped to california ?
Edgar S on May 2, 2018
BEST ANSWER: Looking for the answer as well
Will this PSA Gen2 PA 10 308 "Lower" work with the PSA Gen2 PA-10 20" 308 Complete Barreled Upper" gas system or does it require a stock with a different "Buffer System" for the Rifle length gas system?
Gary W on Jul 20, 2018
What brand and type magazines are compatible?
buddy on Apr 12, 2018
BEST ANSWER: Any LR/SR 308 will work...
Is your Gen2 PA10 compatible with DPMS style uppers?
Bill M on Apr 12, 2018
BEST ANSWER: Yes, this model .308 is compatible with the DPMS upper -- but, NOT the Armalite upper. Two different types of platform.
Are there left hand models available?
Sean E. E on Jul 9, 2018
BEST ANSWER: No
Will this work on some other brand upper?
Vergel P on May 23, 2018
BEST ANSWER: Because there is no "mil spec" for the AR-10, there is no "benchmark" to compare brands to. The PSA lowers and uppers are, to my knowledge, proprietary to one another.
Can I ship to Palmetto State Armory?
Big John on Aug 20, 2018
DOES THIS LOWER HAVE A CLOSED EAR OR CAN I CHANGE TRIGGER GUARD?
Riley on Oct 1, 2018
BEST ANSWER: The trigger guard is permanent on this lower, but it's very nicely contoured. It reminds me of the m-lok guard on my pa-15.
What caliber is marked on the lower? e.g 308 or multi
Miami Mike on Jul 3, 2018
BEST ANSWER: It says PSA 10 Multi.
Can I put a rifle buffer in this?
Garrett J on Oct 21, 2018
BEST ANSWER: No. Unless you change the buffer tube out to a rifle buffer tuber then you can.
It says to use with PSA uppers. I know there's no mil spec, but AR and DPMS. Will it work with my existing Aero Upper DMPS or any other DPMS upper? Or PSA uses some proprietary tech?
Eugene on Jan 28, 2019
BEST ANSWER: It’s a tight fit for any upper that is going on a psa lower. I have a aero upper and I had to bite down pretty hard to get it to fit. But after shooting it a few times it’s working it’s way through to fit better
Will this lower for a aero precision m5 upper?
Jbg1015 on Nov 22, 2018
BEST ANSWER: Will work with any 308 upper that I know of
Is that 7.62x39mm ,or 7.62x51mm?
Daniel F on Aug 11, 2018
BEST ANSWER: The receiver says .308 so the PC answer is only .308. However, to answer your question, 7.62x51mm
will my PA 10 308 gen 2 lower work with psa 300 blackout upper?
Harold P on Nov 8, 2019
BEST ANSWER: No, the 300 Blackout is a shorter bullet which means the bolt has a shorter stroke then the A10 platform. The AR-10 lower have a longer magazine well to accommodate that difference. The lock up pens will not line up from one to the other.
What brand magazines will work with these lowers? I have read that some brands will not fit.
Larry on Feb 6, 2020
BEST ANSWER: I cannot speak to "all" mags available. I use STANAG Amendment 2, and Magpul magazines. They work flawlessly.
Is this a complete lower to where I don’t need anything else other than a psa gen 2 pa10 complete upper to make a complete gun?
Goosegod on Jan 4, 2019
BEST ANSWER: Correct. I bought this complete lower and bought a complete upper from them and put put them together and went to the range. I have no issues with either. I love it. Enjoy!
If i buy a complete lower and upper will that be a complete gun?
Arthur Ivey on Feb 7, 2019
BEST ANSWER: Almost complete, you will still need a box magazine and sights/optic. Be sure to choose a lower that has the appropriate weight buffer & spring to work with the length of gas system on the upper.
will this work with a davidson defense upper?
Justin U on Feb 21, 2019
BEST ANSWER: I have not tried it with a Daniel defense upper. I have tried it with a PSA upper and a Armalite upper.It works fine with both of those. If you’re up or is mill spec I feel it will work
i just bought this lower, can i use 6.5 creedmoor upper with this?
luis l on Feb 8, 2019
BEST ANSWER: i have just completed my 6.5 creedmoor upper build just make sure your upper is on dpms platform
Will this also accept 7.62 ammunition?
Eroom M on Oct 4, 2018
BEST ANSWER: 7.62x 51 or 308 yes
Will this lower work with a 6.5 creedmoor barrel?
Josh W on Aug 7, 2018
BEST ANSWER: Yes, both the .308 and 6.5 creed use the larger AR10 platform instead of the AR15 lower that is more common for 5.56/.223.
Can you install an AR15 ambidextrous safety?
jeffrey d on Dec 19, 2018
BEST ANSWER: Yes. It uses standard lower internals. Only difference between AR10 and AR15 trigger groups is a larger hammer to prevent light primer strikes on the harder mil surplus primers. Trigger and safety are standard. In fact you can run drop in AR15 trigger groups if you are shooting commercial ammo.
Mail spec or commercial?
Jackson P on Oct 20, 2018
BEST ANSWER: It looks like mil spec to me, I thought it said mil spec on the advertising when I purchased this lower. Have had no problems with this lower since I purchased it.
Do Palmetto State Armory PA10, PA65 and AR15 lowers come with a magazine?
Michael T on Sep 1, 2018
BEST ANSWER: No
Will this lower work with the 6.5 creedmoor upper?
Jason H on Aug 8, 2018
BEST ANSWER: Yes
This lower is ready to be built for 6.5. Or is it just for .308?
Ben A on Jan 25, 2019
BEST ANSWER: This can be used for 308 as well as 6.5, in fact, that is what I am doing, getting the upper for the 6.5 to add to this and from everything I have gathered uses the same mags.
Which calibers ,besides .308 uppers,can I attach to this lower?
Fabricio on Jan 10, 2019
BEST ANSWER: Any AR10 caliber complete upper will work from Palmetto, However Ar10s are not as interchangeable as AR15s. I’d use a Palmetto State stripped upper if you are building a rifle to make sure all is well. Some other uppers work, but lines will be off, some other will not.
Will this lower fit a Diamondback upper?
Frank C on Dec 14, 2018
BEST ANSWER: No, The diamondbacks have an armalite style upper.
Is the lower marked anywhere as a .308 Cal?
Rich T. on Nov 7, 2018
BEST ANSWER: Not marked on the lower the caliber is marked on the barrel. I believe the GEN2 PA10 Lower is made for multiple calibers.
Will this work with LR-308 Areo Precision upper?
Brian M on Dec 16, 2018
BEST ANSWER: Yes. The PA10 is a lower for any AR10 upper. I have them on my .308 6mm creedmoor and 6.5mm creedmoor.

Reviews

4.7 / 5.0
207 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
165
30
7
1
4
Mixed feelings...
The trigger pull is typical of a budget or Mil-spec AR, so nothing earth-shattering. I replaced it with a CMC drop-in so that I wouldn't have to fight the trigger. I wasn't fully sold on the idea of a collapsible carbine-style buttstock for a .308 rifle. Although the shoulder-pounding wasn't as bad as I expected, I have since replaced it with an A2 stock which I felt improved the ergonomics and the shooting experience considerably. That said, this lower is an affordable way to own an AR10 and I think I received a fair value for my money.
January 11, 2020
Purchased
over 2 years ago
Nice lower
No issues upon completion of the build. 1 FTF, but fired on second strike, most likely a primer issue, not a hammer issue.
October 29, 2019
Purchased
over 2 years ago
Trigger is very gritty. Up grade and it's a winner.
October 16, 2019
Purchased
over 2 years ago
Best lowers an uppers around thanks a lot.
Very nice fit an finish thanks psa love it.
User submitted image
Added Jul 28, 2019
July 28, 2019
Purchased
1 year ago
Perfect lower, gun looks good and functions perfectly.
User submitted image
Added Jun 23, 2019
June 23, 2019
Purchased
over 2 years ago
Wrong Buffer
It is very rare for PSA to screw up, But when they do, it seems to take them a month or more to get it corrected. They had the wrong buffer in the complete lower that I bought, and it was four or five weeks before I got the correct one from PSA. They really need to get this end Running like there guns, Smooth and Fast. Savagerrray
June 17, 2019
Purchased
over 2 years ago
Very impressed with this upper
I love this it is great quality for a good price
May 31, 2019
Purchased
over 2 years ago
Good bang for the buck!
I purchased this lower a few weeks ago and at the same time purchased and married it to the,PSA Gen2 PA10 18" Midlength .308 WIN 1:10 Stainless Steel 15" M-Lok Upper with BCG & CH - 516447164. Fit and finish at first was pretty impressive but then as I began working on the weapon I realized it would scratch a little easier than I would expect or want. But, it is still nice. Upper and lower mated great with no issues! Barrel threading was a problem though. When mounting a Lantec Dragon it was way off for the crush washer and it took a great deal of work to get this new break on and seated properly. I have installed these breaks on many different brand AR15 and AR10 and this was the first time I ever had a problem! Getting past that I did make a few other changes. The trigger that comes with the lower is mil spec and relatively no better or worse than you would expect but still for long shot, it is pretty darn bad! I replaced it with a Huperfire trigger I already had and now I am a happy camper on the trigger. I added Diamondhead iron sights and a Meopta scope with a Larue mount. Just for S&Gs I highlighted the logo and some other engraved parts of the lower. Does not do a thing to make it shoot better but it does add a little pizazz to the rifle. Also added a BADD ambi selector and a upgrade on a magpul grip and stock. It was raining but I still wanted to try her out so I went to the range. Set up on a hundred yards and was happy that with no break in, I was on paper right away. I ran for rounds total, 20 each of 147 gr boat tail Winchester and 147 gr PMC ball all with no failures. Too much weather to work on the sight so that will come in the next week or two. However, seeing I was on paper and consistent with the first 40 rounds at this distance I can say I believe for the money spent, this is a pretty darn good shooter. I wish the QC would have a better handle on threading the barrel and I could give this another star.
Happy with my first PSA project.
Happy with my first PSA project.
May 23, 2019
I built a 6.5 Creedmore on this receiver and the upper and lower were tight. The lower parts kit installed without any problems. I have fired this new rifle and the lower is working as expected.
May 10, 2019
Purchased
over 2 years ago
.243 upper PA 10 lower
Finally got my PA10 lower fitted to a .243 upper. It's good to go... now to shoot it
March 24, 2019
Purchased
1 year ago

Customers Who Viewed This Item Also Viewed