Out of stock
PSA Gen3 PA10 20" Rifle-Length Stainless Steel .308 WIN 1/10 Classic A2 EPT Rifle Kit
Out of stock

PSA Gen3 PA10 20" Rifle-Length Stainless Steel .308 WIN 1/10 Classic A2 EPT Rifle Kit

Details
SKU 5165490772
Brand Palmetto State Armory
Model Number 5165490772
UPC 5165490772
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

PSA GEN3 PA10 20" RIFLE-LENGTH STAINLESS STEEL .308 WIN 1/10 CLASSIC A2 EPT RIFLE KIT

Barrel Length: 20"
Gas System: Rifle-Length
Barrel Profile: A2 Style
Barrel Steel: 416R Stainless Steel
Barrel Finish: Stainless Steel
Chrome Lining: None
Muzzle Thread: 5/8-24
Chamber: 308 WIN
Twist Rate: 1:10
Barrel Extension: M4-style
Diameter at Gas Block: .750
Gas Block Type: Front Sight Base
Gas Tube: Black Nitride Gas Tube
Muzzle Device: A2 Style Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: PA10
Handguard Type: PSA Classic Polymer Rifle-Length Handguards
Bolt Carrier Group Included: Yes, Toolcraft PA10 BCG with extra power extractor spring
Charging Handle Included: Yes, 7075 T6 CH Included

Features

You asked we listened! Palmetto State Armory is proud to release our Gen3 PA10 Barreled Upper Receiver!  The Gen3 model has been enhanced to improve the reliability and longevity of our PA10 platform. This new platform includes several features that have never before been included on our PA-10 platform. We hope you enjoy these new features and look forward to your feedback!

With enhanced durability and improved function, the new and improved PSA PA10 Gen3 is here.  The Gen3 model offers a black nitride stainless gas tube to better resist high heat and corrosion while maintaining a glossy black finish.  All Gen3 PA10 models come with a dimpled barrel for ease of gas block replacement if you choose to do so. 

Gen 3 Benefits at a glance:

  • Dimpled 416R Stainless Steel Barrel
  • Extra Power Extractor Springs
  • 7075 T6 Charging Handle Included in all uppers
  • Black Nitride Gas Tube
  • Barrel Nuts properly torqued to military specifications
  • Anti-slip and anti-rotation handguards

 

Barrel: The dimpled, 416R Stainless Steel, 308 WIN 1/10 twist, rifle-length gas system upper is paired with a Palmetto State Armory Classic Rifle-Length Handguard, Front Sight Base, and an A2-style muzzle device. The gas system is enhanced with a nitrided gas tube in order to better resist high heat and corrosion.

Upper:  Precision machined from forged 7075-T6 aluminum, then Black anodize hard coated to MIL-8625 Type 3 class 2. With enhanced dual retention anti-slip and anti-rotating handguards.  

Bolt Carrier Group: Tool craft 9310 steel bolt assembly with extra strength extractor springs that is nitride for increased durability.  8620 carrier, nitride treated, with a nitride treated gas key properly staked with grade 8 fasteners.  A 7075 T6 aluminum charging handle is also included.

The Gen3 PA10 receivers are functionally compatible with the Gen1 and Gen2 upper receivers, however, we recommend matching Gen3 lowers to Gen3 uppers for best appearance and performance.  There are external cosmetic differences when mixing Gen1/Gen2 with Gen3 upper and lower receivers that some may not find appealing.  

The AR10 platform does not enjoy a common design between manufacturers, like the AR15. As a result, there can and will be subtle differences in the parts kits of various manufacturers. Some parts, like the fire control group, are shared with the AR15 platform to preserve the options for upgrading. For best results, we recommend only using PSA PA10 parts with our uppers and lower receivers. We do not recommend using other manufacturers parts in our products.

Reviews

Q & A

Retail Stock

Loading...