Out of stock
Daniel Defense DDM4 M4A1 CA Compliant .223 Rem/5.56 Semi-Automatic AR-15 Rifle - 15126055
Out of stock

Daniel Defense DDM4 M4A1 CA Compliant .223 Rem/5.56 Semi-Automatic AR-15 Rifle - 15126055

SKU 796465
Brand Daniel Defense
Model Number 15126055
UPC 815604016117
This product is fulfilled by a PSA Partner and shipping times may vary.
All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details


  • Series/Collection: DDM4 M4A1 CA Compliant
  • Action: Semi-Automatic
  • Magazine Type: DD
  • Stock Type: 6-Position Buttstock
  • Muzzle Type: Flash Suppressor
  • Magazine Capacity: 10+1
  • Caliber/Gauge: 223 Remington/5.56x45mm NATO
  • Twist Rate: 1:7"
  • Orientation: Right
  • Barrel Material: Chrome Molybdenum Vanadium Steel
  • Receiver Material: 7075 T6 Aluminum
  • Stock Material: Polymer
  • Barrel Finish: Chrome-Lined, Phosphate Coated
  • Receiver Finish: Brown Cerakote/Black Phosphate
  • Stock Finish: Brown Cerakote/Black Phosphate
  • Barrel Length: 14-1/2"
  • Overall Length: 31-1/2" to 34-3/4"
  • Barrel Type: M4 Profile


The Daniel Defense M4A1 features the M4A1 RIS ll, which has been in use by us special operations command (socom) for the Sopmod ll Weapons System since 2005. The M4A1 features a 14-1/2 inches cold hammer forged M4 profile barrel with a permanently attached daniel defense flash suppressor. The new independently ambi grip-n-rip charging handle accommodates left- and right-handed shooters and is engineered for suppressed fire, with anti-gas features that redirect gas flow upward and away from the face and operator. This rifle also comes with the rugged and comfortable daniel defense buttstock and pistol grip.


  • Lower receiver - Mil-Spec with enhanced flared magazine well and rear receiver QD swivel attachment point, CNC machined of 7075 T6 aluminum, Type III hardcoat anodized
  • Upper receiver - Mil-Spec with indexing marks and m4 feed ramps, CNC machined of 7075 T6 aluminum, Type III hardcoat anodized
  • Barrel - chrome moly vanadium steel, cold hammer forged, 1:7 twist, 14.5 inches m4 profile, chrome lined, Mil-Spec heavy phosphate coated, and hp/mpi tested
  • Gas system - pinned low profile gas block CNC machined of 4140 hardened steel with Mil-Spec heavy phosphate coating, carbine length, direct impingement
  • Muzzle device - pinned and welded daniel defense flash suppressor, extended, 17-4 PH stainless steel, salt bath nitride finished
  • Bolt carrier group - M16 profile, Mil-Spec MP tested, chrome lined, properly staked gas key
  • Buffer - H buffer
  • Handguard - Daniel defense M4A1 rail interface system (ris) ii, CNC machined of 6061 T6 aluminum
  • Charging handle - Grip-N-RIP charging handle, body CNC machined of 7076 T6 aluminum, handles and latch CNC machined of 6061 T6 aluminum, heavy duty stainless steel roll pins, Type III hardcoat anodized
  • Receiver extension - 6-position Mil-Spec 7075 T6 aluminum
  • Buttstock - Daniel defense buttstock, glass filled polymer with soft touch overmolding
  • Rail panels - Daniel defense rail panels made from santoprene, heat-resistant to 300 deg F
  • CA complaint
  • Made in the USA


Q & A

Retail Stock