Out of stock
Daniel Defense DDM4 V7 Pro 5.56 Semi-Automatic AR-15 Rifle, Rattlecan Cerakote - 128-02364-047
Out of stock

Daniel Defense DDM4 V7 Pro 5.56 Semi-Automatic AR-15 Rifle, Rattlecan Cerakote - 128-02364-047

Details
SKU 796468
Brand Daniel Defense
Model Number 12802364047
UPC 818773020923
Customers must read Compliance Information before purchasing.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

Product Details

Details

  • Series/Collection: DDM4 V7 Pro
  • Action: Semi-Automatic
  • Magazine Type: DD
  • Stock Type: Buttstock
  • Trigger Type: Super Dynamic
  • Muzzle Type: Mitigator
  • Magazine Capacity: 30+1
  • Caliber/Gauge: 5.56x45mm NATO
  • Twist Rate: 1:7"
  • Orientation: Right
  • Safety: Ambidextrous
  • Barrel Material: Chrome Molybdenum Vanadium Steel
  • Receiver Material: 7075 T6 Aluminum
  • Stock Material: Polymer
  • Barrel Finish: Chrome-Lined, Phosphate Coated
  • Receiver Finish: Hardcoat Anodized
  • Stock Finish: Rattlecan Cerakote
  • Barrel Length: 18"
  • Overall Length: 34-3/4" to 37-7/8"
  • Weight: 7.4 lb
  • Barrel Type: S2W Profile

Features

The DDM4 V7 pro was designed for competitors looking for a platform to dominate podiums in today's popular multi gun matches. Built around our 18 inches strength to weight, cold hammer forged barrel, this platform delivers the speed, controllability, and precision required to engage the most difficult multi-gun stages. The V7 pro comes standard with the MFR 15.0 M-Lok rail, which offers incredible weight savings as well as superior cooling, ergonomics, and modularity while maintaining the strength and durability expected from Daniel defense. An uninterrupted picatinny rail on top and M-Lok attachment points ensure plenty of real estate for optics and accessories and allow for the maximum sight radius for accurate shooting with rail mounted iron sights. The long 15 inches rail gives operators the option to have the support hand extended out closer to the muzzle, allowing them to drive the gun more precisely, and it prevents over-travel when transitioning between multiple targets. The new independently ambi Grip-N-Rip charging handle accommodates left and right handed shooters and is engineered for suppressed fire, with anti gas features that redirect gas flow upward and away from the face and operator. The newly designed muzzle climb mitigator redirects propellant gasses through calibrated ports, countering both recoil and muzzle climb. A geissele automatics super dynamic 3 gun trigger delivers rapid hits on target with its light, short pull and quick reset. Combined with the softened recoil impulse of a rifle length gas system, this allows for shorter split times, more precise follow-up shots, and reduced fatigue. The rifle is finished off with the rugged and comfortable Daniel defense buttstock and pistol grip.

Features:

  • Upper receiver - Mil-Spec with indexing marks and m4 feed ramps, CNC machined of 7075 T6 aluminum, Type III hardcoat anodized
  • Trigger - geissele automatics super dynamic 3-gun trigger
  • Barrel - HP/MPI tested
  • Gas system - pinned low profile gas block CNC machined of 4140 hardened steel and Mil-Spec heavy phosphate coating, mid-length, direct impingement
  • Muzzle device - 17-4 PH stainless steel, salt bath nitride finished
  • Bolt carrier group - M16 profile, Mil-Spec MP tested, chrome lined, properly staked gas key
  • Buffer - H buffer
  • Handguard - Daniel defense MFR 15.0, CNC machined of 6061 T6 aluminum, M-Lok attachment, Type III hardcoat anodized
  • Charging handle - Grip-N-RIP charging handle, body CNC machined of 7076 T6 aluminum, handles and latch CNC machined of 6061 T6 aluminum, heavy duty stainless steel roll pins, Type III hardcoat anodized
  • Receiver extension - 6-position Mil-Spec 7075 T6 aluminum
  • Buttstock - Daniel defense buttstock, glass filled polymer with soft touch overmolding
  • Pistol grip - Daniel Defense pistol grip, glass filled polymer with soft touch overmolding
  • Made in the USA

Reviews

Q & A

Retail Stock

Compliance

All NFA Rules Apply.
These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Handling firearms or firearms parts can expose you to lead and other petroleum products known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands thoroughly after handling. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).
Loading...