BLEM PSA 16" Midlength 5.56 NATO 1:7 A2 Nitride Freedom Rifle Kit - 507279B

More Views

BLEM PSA 16" Midlength 5.56 NATO 1:7 A2 Nitride Freedom Rifle Kit - 507279B

TEMPORARILY OUT OF STOCK

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 507279B
UPC: 507279B
MFR#: 507279B

16" Barrel length
Chrome Moly barrel steel
5.56 Nato Chamber
A2-style profile barrel
Melonite Finish
1 in 7" twist rate
M4 Feed ramps
F-Marked Front sight post
A2 Flash Hider
Sling Loop
Standard Hand Guards 
Forged Upper Receiver
T-marks
M16 Bolt Carrier Group
Carpenter 158 Bolt
Charging Handle
PSA Freedom Lower Build Kit

 ** These uppers will have cosmetic blemishes that do not affect function. This may include, but is not limited to, forging marks under the finish, scratches, slight variation in the finish color coat.

 

Add To:

Barrel: 16" barrel length Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a mid-length gas system. The A2-style profile barrel is melonite finished for accuracy and durability. Barrel is finished off with an .750" diameter F-marked front sight base with sling swivel, standard handguards and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, T-marks, these upper upper receivers are made for us right here in the USA.

Bolt Carrier Group: For AR15 and M16 rifles and carbines. Bolt is made of shot-peened, Mil-spec Carpenter 158® steel. Gas key is secured with grade 8 fasteners and staked. Bolt carrier is parkerized outside and chrome lined inside. Includes Charging Handle.

Lower Build Kit: Includes the PSA Freedom Lower Build Kit

SKU: 507279B
SKU 507279B
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 507279B

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 22 questions Browse 22 questions and 93 answers
What else is needed for this kit to assemby the complete rifle?
Tom on Mar 9, 2019
BEST ANSWER: Purchase a “ ar-15 lower” of your choice. And kapow, you are one YouTube video away from building your first AR
what more is needed to have a complete rifle?
Jeff L on Mar 8, 2019
BEST ANSWER: All you need is a stripped lower, a rear sight, plus the tools and know how to put it al together.
Does this kit include everything needed since it comes with the Freedom lower build kit?
ALD08 on Mar 8, 2019
BEST ANSWER: Yes, the kit comes with every single little part. you just need to provide a lower receiver. and it shoots just fine at 100 yards.
Is this everything to make a complete rifle?
Gary N on Mar 7, 2019
BEST ANSWER: You will have to purchase a lower receiver or an 80% lower. Otherwise, everything is there. This also can be sent directly to your house because it is not the registered part of the gun. It comes exactly as pictured, the upper comes put together and the lower is the only parts that need to be built.
what will I need to complete build?
ronnie t on Mar 9, 2019
BEST ANSWER: A lower reciever and basic tools to put together. Will need vice blocks to for your lower
Is handguard retainer round,rectangular, or oval? I have old MOE MAG418 I want to put on upper, and it only works on round or rectangular.
bonegunner on Mar 7, 2019
BEST ANSWER: The Mid Length gas system is usually a triangular retained although I have seen both . The 5 or so I purchased all had the triangular retainer
Anything else to buy other than sights?
Sandbed on Mar 7, 2019
BEST ANSWER: Just a stripped lower receiver. But once you have that and this kit, you have a complete rifle.
Will the 5.56 NATO shoot .223 as well?
Ray H on May 1, 2019
BEST ANSWER: Yes the 5.56 will shoot .223 no problem!
This will be my 1st ar what else do I need to finish this kit?
steve r on Mar 9, 2019
BEST ANSWER: You will need a lower receiver to complete the kit. I have built several with no issues. Great little shooter my kids love them. If this is your first build I would recommend watching a couple videos on YouTube. Take your time be patient and enjoy
What rear sight is recommended for this upper?
Van F on Apr 30, 2019
BEST ANSWER: Leapers UTG AR15 Super Slim Fixed Rear Sight, Picatinny MT-950RS03 Front Sight Color: Black, Rear Sight Color: Black
is a signature required when delivered to my house?
Jeff K on Apr 27, 2019
BEST ANSWER: Nothing I've bought from PSA in the past has ever been shipped "signature required".
what lower reciever do i need for this?
LARRY K on Apr 25, 2019
BEST ANSWER: I used an Anderson lower but any AR15 lower receiver is suitable. PSA has several suitable lowers.
What's are the size of the hand guards?
Beat818 on Mar 18, 2019
BEST ANSWER: mid-length.
What else would I need to complete this rifle kit? Just a lower receiver..?
Brandon M on Mar 8, 2019
BEST ANSWER: Yes just any mil spec stripped lower.
Are these barrels 4140,or 50?
Barry L on May 12, 2019
BEST ANSWER: They are made from the tears of liberals.
I have a stamped lower, trigger assembly and stock all I need is the barrel and upper to make my gun ready. Will this kit work?
Anthony M on Mar 9, 2019
BEST ANSWER: This kit comes with everything need, including bcg and charging handle, so if your lower is ready for all the parts, then yes after you install you can fire right away.
Yesterday this was daily deal with sku 507279 and sold out, shows up today as sku 507279B. What is the difference in the two?
bonegunner on Mar 8, 2019
BEST ANSWER: these kits are identified as cosmetic Blems.
minor, if you even find it.
Does any part of this have to be registered in Florida?
Sandbed on Mar 7, 2019
BEST ANSWER: nope, and there is no registration in Florida only background checks on lowers or completed rifles. However, if you buy any lower or a complete rifle online you will need to send it to a registered FFL in Florida on the contrary of what some may say or think :).
Is the barrel on this particular kit made from 4140 Chrome-Moly Steel, or is it made from 4150 Chrome-Moly Steel? Thanks in advance, Adam.
Adam C on May 1, 2019
BEST ANSWER: 4140 rings a bell. 4150 seems like high carbon for this application, and think it would have attracted my attention if it had been specified.
What kind of front hand guard retaining cap does this come with, round or triangular?
Deputy514 on Apr 28, 2019
BEST ANSWER: Triangle
What barrel steel is used 4150v or 4140?
Shawn F on May 3, 2019
What is the length of this handguard, is it 10"?
wyatt on May 1, 2019

Reviews

4.8 / 5.0
88 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
77
7
2
1
1
As good as anything else I own. Except this one is my use abuse and have fun.
Really nice and glad to own it.
May 16, 2019
Purchased
2 months ago
Fantastic deal that made it affordable to finally get my AR15
Such a killer deal on this kit. Took about an hour to assemble, with the aid of a couple YouTube videos, for my first build.
Used an AeroPrecision stripped lower and had to throw this stupid featureless grip and stock locker to make it California legal....
Can’t wait to take it out this weekend and put some rounds through it!
May 13, 2019
Purchased
3 weeks ago
Excellent
Great product. Easy to put together with a Aero Precision lower, looks good, could hardly find the slight mark on the left side of the upper. Good thing its getting painted came. I will be buying some more. Keep up the good work.
May 12, 2019
Purchased
2 months ago
Overall I am impressed
Ordered the Blem kit only found 3 small dots on barrel.
Since I have put 100s of rounds thru it with no issues.
Thanks Pakmetto.
May 12, 2019
Purchased
2 months ago
Good starter rifle ,truck rifle,beater
I assembled this kit on a LRB lower..Kit arrived fast.Packing was good.I inspected the kit & was unable to find any blemishes.Assembly of kit was without any issues.I had to make it kaliforniastan complaint with the addition of Strike industries fin,muzzle break & stock locked in place.So I can use standard magazines without legal issues.Yeah I know kaliforniastan sucks..I may buy another one of these kits.
May 11, 2019
Great Value
Great value - easy assembly into a $30 stripped lower and was throwing hot lead same afternoon with no issues at all! All components mil-spec and upgradable at any time one wishes. I've already added an inexpensive quad rail, flashlight and scope - and it shoots as well as anyone else's AR. Best part ... I've STILL not spent 1/2 of what they have! Great experience dealing with PSA!
May 11, 2019
Purchased
2 months ago
Great deal
Delivered very timely, great deal, looks good and assembled with the lower easily. Shoots great.
May 11, 2019
Purchased
2 months ago
Incredible deal for the price.
This kit was awesome for $259. The blemish was so minor that it was hard to even find. Functions flawlessly after 1000 rounds. It's impossible to beat at that price and runs as good as my spikes rifle. Will purchase from PSA again.
May 10, 2019
Purchased
2 months ago
Good quality, low price
Bought this for my first build. Only a couple Mags through it so far but been flawless. For being a very inexpensive build kit, it seems to be really good quality. I have recommended to others a few times already.
May 10, 2019
Purchased
2 months ago
BLEM ??
I am very pleased with this upper. I have looked it over carefully and I cannot find the BLEM, did they send the wrong upper by mistake?
May 9, 2019
Purchased
2 months ago

Customers Who Viewed This Item Also Viewed