16" Railed Rifle ar 15 build kit

More Views

PSA 16" CHF A2 Mid-Length 5.56 NATO 1/7 13.5" Lightweight M-Lok MOE EPT Rifle Kit - 5165448203

In stock

Regular Price: $ 949.99

Special Price $ 599.99

Quick Overview

free shipping Free Shipping applies to this item only and not the entire order.

WARNING: This product can expose you to the chemical lead, which is known to the State of California to cause cancer and reproductive harm. For more information go to www.p65warnings.ca.gov (CA Health and Safety Code Section 25249.6).

SKU: 5165448203
UPC: 5165448203
MFR#: 5165448203

Barrel Length: 16"
Gas System: Midlength 
Barrel Profile: A2
Barrel Steel: Cold Hammer Forged Steel
Barrel Finish: Phosphate
Chrome Lining: Extra Thick
Muzzle Thread: 1/2-28
Chamber: 5.56 NATO
Twist Rate: 1:7
Barrel Extension: M4
Diameter at Gas Block: .750
Gas Block Type: Low-profile
Muzzle Device: A2 Flash Hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: PSA 13.5" Lightweight M-Lok Rail
Bolt Carrier Group Included: Yes
Bolt Steel: Carpenter 158
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes
Optics: Magpul MBUS Front and Rear Flip-Up Sights, Black
Fire Control Group: PSA Enhanced Polished Trigger (EPT) FCG
Overall Length: 24.5"
Weight: 4.0 lbs

Add To:

Barrel: A proprietary blend of Hammer forged chrome molly vanadium made by FN that is referred to as "Machine Gun Steel" by virtue of its required use in FN's M249 and M240 weapons. The hammer forging process work hardens the steel, making it more durable. In addition, the chrome process for the bore allows for a lining almost twice as thick as a standard M16 for enhanced durability. Chambered in 5.56 NATO, with a 1:7 twist, M4 barrel extension, and a mid-length gas system. This A2 profile barrel is Mil-spec phosphate coated, High Pressure tested and Magnetic Particle inspected.The barrel is finished with with a .750" diameter low-profile gas block, PSA 13.5" Lightweight M-Lok Free Float Rail, and an A2 flash hider.

Upper: Forged 7075-T6 A3 AR upper is hard coat anodized black for durability. Featuring M4 feedramp cuts, these upper upper receivers are made for us right here in the USA.

Bolt Carrier Group: For AR15 and M16 rifles and carbines. Bolt is made of shot-peened, Mil-spec Carpenter 158® steel. Gas key is secured with grade 8 fasteners and staked. Bolt carrier is parkerized outside and chrome lined inside. Includes Charging Handle.

Lower Build Kit:  PSA MOE EPT Lower Build Kit, Black

Includes: Magpul MBUS Sight Set, Black 

SKU: 5165448203
SKU 5165448203
Brand Palmetto State Armory
Daily Deal No
Daily Deal Expires No
Youtube Video No
Free Shipping? Yes
Free Shipping Qty Label No
Free Shipping Qty No
SKU: 5165448203

Questions and Answers

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 7 questions Browse 7 questions and 8 answers
Considering my first AR build with this kit. Any recommendation for a decent lower that I should use? Thx.
Ed C. on May 15, 2018
BEST ANSWER: Honestly most lowers are about the same as long as we're talking mil-spec lowers. This is because there are only a few companies that make lowers (they brand them out for other companies). I would just stay away from the polymer lowers personally. I'd recommend Spikes Tactical lower receivers. They look cool and Spikes is a great company that stands behind their products 100%.
Is this a heavy profile barrel ?
Roberto S on May 2, 2018
BEST ANSWER: The description states that it's A2 profile, so it should be about .750" from the gas block forward and about .625" underneath the handguards / rail. Looking at the photo on a big monitor, it does appear to be thinner under the rail.
What is the difference between a carbine length gas system and he mid length gas system?
Thereckshop on May 27, 2019
BEST ANSWER: A mid length gas tube is a little longer than a Carbine length gas tube, resulting in a gas system that uses a higher volume of gas to chamber another round. Someone correct me if I’m inaccurate, but this should result in less recoil and is easier on your internals.
Does this weapon make a full auto rifle or can it be configured as is for semi-auto?
Thereckshop on May 27, 2019
BEST ANSWER: This is a semi auto rifle.
The Only markings on the bolt are 158. Is this bolt HPI/MPT?
Tom N on May 21, 2019
BEST ANSWER: You bought this kit for the superior FN made CHF barrel and the enhanced trigger. Don’t worry about the bolt. It’ll work fine.
Is this really only 4 lbs?
Will T on May 27, 2019
Is the barrel length 16” without the flash hider?
John P on May 12, 2019
BEST ANSWER: yes, all barrel lengths are measured before muzzle end is put on, unless it specifically states otherwise ( 14.5" barrel with pinned and welded muzzle end to make "x" amount of inches for total barrel length)


5.0 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Worth The Extra Expense For The FN Barrel
This was my first PSA AR build but I have several Colt AR-15's. Wanted a nice custom AR with the high barrel quality that I could customize and easily scope. The kit comes with everything but the stripped lower. I used an Anderson lower and the fit and finish match the upper nicely. Just got back from the range and was shooting .75" to 1.25" groups with a 1-4X Vortex at 100 yards with inexpensive Geco 55 grain FMJ ammo (See Photo). Can't wait to work up a few hand loads for this excellent rifle. Everything feels great. Love the MOE furniture. I will probably eventually upgrade the trigger but the PSA EPT one is very serviceable and smoother than any of my Colt rifles. Great job PSA. This kit is a winner!
Geco 55 grain FMJ Ammo at 100 yards.
Love the looks and feel of this AR.
May 22, 2019
Great Kit at a Wonderful Price Point 5.16.2019
Solid Upper! This is my first AR and first build. I have been reading, listening, and asking questions about AR style rifles for over 6 months. This kit came with everything except a stripped lower receiver. Everything was received in less than 5 business days from order. I was compelled to use Palmetto after their interview with Reed and JD on the AR-15 Podcast. Was very impressed how they are bettering themselves and their customer experience. Can not wait to built the rifle this weekend and show off the results. Very Excited!
May 16, 2019
1 month ago
Awesome Kit
This kit is the bee's knees. It comes with everything you need except the stripped lower. Mine is marked FN, HF, MP, 5.56. 1/7 on the barrel to let you know it is cold hammer forged and magnetic particle inspected. This kit has great specs and will get you a quality rifle on par with high end manufacturers like BCM, Spikes, and of course FN.
November 19, 2018
1 year ago
The FN barrel is great!! No issues so far. The upper could have been finished better inside. Not coated all the way.
July 22, 2018
1 year ago
O excellent deal !!!
One thing .. Excellent!!! I matched it with a aero precision lower and when shooting .. not a single problem.. the quality and finish is there
July 21, 2018
1 year ago
Great kit
I used this kit to complete my first 80% build. Although this was my first build, it was far from my first AR. What I would have given to have had a weapon this nice back when I was issued my A1. I hope to get many years of life out of this one, and for the price, it was an outstanding value. Highly recommended.
July 3, 2018
1 year ago
Nice upper well built, have not tried it out
June 19, 2018
1 year ago
Great rifle kit. Though I swapped out some other parts for a 2 tone build.
I waited a long time for this kit to come in. I am not disappointed. Seems to be a good rifle. Still in the testing faze but so far so good.
Built it as a 2 Tone. Great rifle.
Built it as a 2 Tone. Great rifle.
June 5, 2018
1 year ago
Premium Rifle
This is a very good kit, I built this with an Anderson lower. Accurate and functions 100%, seems gassed correctly too.
June 2, 2018
1 year ago
Highly recommend
Can’t beat it for the money. Shoots tight groups regardless of distance amd Ammo
June 1, 2018
1 year ago

Customers Who Viewed This Item Also Viewed